太宰府のN邸


©YASHIRO PHOTO OFFICE



風孔のある白い箱
敷地は福岡県太宰府市にある閑静な住宅街にある。幅8.5m、奥行きは約20m程の細長い平行四辺形の敷地形状で、南面は4mの前面道路に面する。東西は住宅が密集して建てられていて、北側は青空駐車場で空地となっている。施主からの要望はできるだけシンプルな箱形で白を基調とした空間が求められた。諸条件から構造は木造枠組壁工法と決まっていたため、プランは耐力壁による面積区画と同時に計画を行った。枠組壁工法は壁がすべて構造壁と評価されるため、後の改修が難しくなることから、できるだけ部屋としての仕切りがない一室空間となるように配慮している。細長いボリュームに対して一定間隔で短辺方向にそで壁(梁を含むフレーム)が必要になるが、風配図より中間期には南北軸に自然通風が期待できることが明らかなため、仕切りを設けず、仕切ったとしても建具で開閉できるようにして、南北軸で5層の風孔を設けた。風孔は強調したフレームとフレームがわからない風孔があり、部屋をゆるやかに仕切る。最前面のフレームはテラスと道路側をゆるやかに仕切ると同時に、開かれた住宅としてのファサードを担う。フレームの厚さは見付けをあえて絞らず、自然体となるように木造フレームを厚さをそのまま仕上げた。




©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE

©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE


©YASHIRO PHOTO OFFICE




基本データ  

建物名称|太宰府のN邸
所在地|福岡県太宰府市
主要用途|専用住宅
家族構成|夫婦+子供1人

設計
設計 KMR・建築事務所|KMR・Architects
構造 KMR・建築事務所|KMR・Architects + D&H
設備   KMR・建築事務所|KMR・Architects

施工  
D&H 

構造
構造 木造枠組壁工法 
基礎 べた基礎

規模  
階数 地上2階
軒高5,806mm 最高高さ6,820mm
敷地面積 158.18m2
建築面積 67.28m2
延床面積 101.43m2

敷地条件   
地域地区 市街化区域 第一種住居地域
防火指定 22条区域

設備  
暖房方式|床下ルームエアコン+水蓄熱式床暖房(アクアレイヤーシステム)
冷房方式|2F上部ルームエアコン
換気方式|第三種換気
給水方式|公共上水道直結
排水方式|公共下水道直結
給湯方式|エコキュート

外皮性能
壁|フェノールフォーム40t(外貼)
屋根|フェノールフォーム50t(外貼)
基礎立ち上がり|ポリスチレンフォーム3種30t+20(防蟻・両面貼り)
基礎底盤|ポリスチレンフォーム3種50t(防蟻・外貼)
外皮平均熱貫流率(UA値) 0.55 W/㎡K

搭載メディア

archello(Amsterdam)

N Residence in Dazaifu


-Site-
The site is located in a quiet residential area in Dazaifu City Fukuoka,
it has a parallelogram shape with a width of 8.5 meters and a depth of 20 meters. It faces a 4m road on the south side.
To the east and west, houses are densely built up, but the north side is vacant.
The client requested a white space with as simple a box as possible.

-White box with wind hole-
The construction method was the wooden frame wall construction method, which is the builder's specialty.
Planning and area divisions were planned simultaneously to balance the walls.
The framed-wall construction method is difficult to renovate later because all the walls are considered structural walls.
Therefore, the space was designed to be a one room space with as few partitions as possible.
Since natural draught can be expected on the north-south axis in the spring and autumn on the wind distribution diagram, Wind holes were provided for the 5 layers.
The air holes have visible and invisible frames, loosely dividing the room.
The frontmost frame gently divides the terrace from the street side, and at the same time, it also creates the facade of an open house.The thickness of the frame is expressed as the thickness of the structural material.

AirAquaSYSTEM -Heating and cooling system using water as heat storage material-

The air-aqua system with water packs (Aqua cell) placed under the floor is used for the air-conditioning system.
A home air conditioner is installed under the floor as a heat source, and water packs are heated to provide underfloor heating.
Aqua cell places an aluminum plate between the joists and puts it on top. The pack material is durable and maintenance free.
It can also be used as stock water in the event of a disaster.
This system differs from general floor heating with the following features:

1) Because water causes natural convection, there is little unevenness and heat is dispersed and does not become trapped.
2) The water temperature of the water pack is in the low temperature range of 25 to 30 degrees, so you can use any finishing material.
3) Since a large heat storage effect can be expected, it is possible to realize a space with little fluctuation in room temperature.

In particular, the heat storage effect of 3) is great, and by storing heat from direct sunlight during the daytime in combination with the concrete foundation with external insulation, heat is released at night and the room temperature is stabilized.





inserted by FC2 system